Selection View

From Developer Documents
Revision as of 11:04, 29 March 2012 by Antti Villberg (talk | contribs)
Jump to navigation Jump to search

The Selection View is a standard Simantics view, which shows tabbed configuration views about the current workbench selection.

Selection View (org.simantics.browsing.ui.platform.PropertyPageView)

The Selection View is contributed in org.simantics.browsing.ui.platform/plugin.xml.

Selection View displays content for the workbench selection.

Selection View listens the active workbench part and tries to obtain org.simantics.ui.workbench.IPropertyPage via IAdaptable.getAdapter for displaying selections from the part.

Most Simantics workbench part implementations adapt into the standard property page implementation described next.

Standard property page (org.simantics.selectionview.StandardPropertyPage)

The standard property page displays a tab folder (org.simantics.selectionview.StandardProperties), which contains n tabs contributed by a set of selection processors (org.simantics.selectionview.SelectionProcessor).

Selection processing


public interface SelectionProcessor<S, B> {

    /**
     * @param selection the incoming selection to process
     * @param backend for providing back-end access to the processor
     * @return an ordered set of
     *         <code>org.simantics.browsing.ui.swt.ComparableTabContributor</code>
     *         instances representing the property tabs to be contributed to the
     *         selection view. The processor must not return <code>null</code>,
     *         return an empty collection instead.
     */
    Collection<?> process(S selection, B backend);

}

Selection is the workbench selection.

Backend is ReadGraph in most cases (could be something else if custom property pages are used).

Selection processors are contributed by

  • Extending StandardPropertyPage and overriding method getSelectionProcessor
  • Constructing StandardPropertyPage with a set of browse contexts for which selection processors can be contributed via extension point org.simantics.browsing.ui.common.selectionProcessorBinding

The obtained set of ComparableTabContributors are sorted and used to create tabs for the tabbed folder.

A modelled implementation of the SelectionProcessor interface is described next.

Modelled Selection Processor (org.simantics.selectionview.StandardSelectionProcessor)

The implementation of modelled selection processor does the following procedure:

Try to get a model resource from the workbench selection. 


private Resource getModel(ReadGraph graph, Object selection) throws DatabaseException {
		
		Variable variable = ISelectionUtils.filterSingleSelection(selection, Variable.class);
		if(variable != null) {
			return Variables.getModel(graph, variable);
		}
		
		return ISelectionUtils.getSinglePossibleKey(selection, SelectionHints.KEY_MODEL, Resource.class);		
		
	}

Seek all instances of http://www.simantics.org/SelectionView-0.0/TabContribution from model dependencies and adapt (ReadGraph.adapt) them to org.simantics.selectionview.TabContribution. 


SEL.VariableTabContribution <T SEL.TabContribution
  >-- SEL.VariableTabContribution.HasTest <R L0.DependsOn
  >-- SEL.VariableTabContribution.HasView <R L0.DependsOn
  >-- SEL.VariableTabContribution.HasPriority <R L0.DependsOn

SEL.TypedVariableTabContribution <T SEL.VariableTabContribution
  >-- SEL.TypedVariableTabContribution.HasType <R L0.DependsOn

public interface TabContribution<T> {

	void contribute(ReadGraph graph, T selection, Collection<ComparableTabContributor> result) throws DatabaseException;	
	
}

(SEL.VariableTabContribution.HasView refers to a Modelled View configuration for describing the contents of the tab.)

Seek all instances of http://www.simantics.org/SelectionView-0.0/SelectionTransformation (which are also L0.Function) and apply them (org.simantics.db.common.utils.Functions#exec) as long as needed to obtain a closure of inputs.

Feed all inputs to the found TabContributions to obtain a set of tabs.

Tab implementation

The standard way of implementing a tab is a Simantics Modelled View.

Generic configurations for modelled tabs can be found in the ontology http://www.simantics.org/SelectionViewUI-1.0.

The standard modelled property tab is http://www.simantics.org/SelectionViewUI-1.0/StandardProperties 


SEL.StandardPropertiesBase <T VIEW.Explorer
  @L0.assert VIEW.Control.layoutData
    _ : VIEW.GridLayout.GridData
      VIEW.GridLayout.GridData.horizontalGrab true
      VIEW.GridLayout.GridData.verticalGrab true
  @L0.assert VIEW.Control.style 
    _ : VIEW.Control.Style
      VIEW.Control.Style.HasConstant VIEW.Control.Style.Constant.Multi
      VIEW.Control.Style.HasConstant VIEW.Control.Style.Constant.FullSelection
  @L0.assert VIEW.Explorer.columns 
    _ : VIEW.Explorer.ColumnList
      @L0.list
        SEL.PropertyColumn
        SEL.ValueColumn
        SEL.UnitColumn
  @L0.assert VIEW.Explorer.input MOD.Functions.singleVariableSelection
  @L0.assert VIEW.Explorer.browseContext
    _ : VIEW.ResourceURI
      VIEW.ResourceURI.HasResource SEL.StandardPropertiesBase.BrowseContext : SEL.StandardProperties.BrowseContextStandardChildren

SEL.StandardProperties : SEL.StandardPropertiesBase

SEL.StandardProperties.BrowseContextStandardChildren <T SEL.StandardProperties.BrowseContextWithoutChildren
  @L0.assert VP.BrowseContext.HasChildContribution 
    _ : VP.ChildContribution
      VP.ChildContribution.HasParentNodeType MOD.ModelingBrowseContext.Variable
      VP.ChildContribution.HasChildNodeType MOD.ModelingBrowseContext.Variable
      VP.ChildContribution.HasRule _ : MOD.ModelingBrowseContext.VariablePropertyRule
        MOD.ModelingBrowseContext.VariablePropertyRule.RequireProperty "HasStandardPropertyInfo"
  @L0.assert VP.BrowseContext.HasChildContribution 
    _ : VP.ChildContribution
      VP.ChildContribution.HasParentNodeType MOD.ModelingBrowseContext.Variable
      VP.ChildContribution.HasChildNodeType SEL.CategoryNode
      VP.ChildContribution.HasRule _ : SEL.VariablePropertyCategoryRule

SEL.StandardProperties.BrowseContextWithoutChildren <T VP.BrowseContext
  @L0.assert VP.BrowseContext.HasVisualsContribution
    _ : VP.VisualsContribution
      VP.VisualsContribution.HasNodeType MOD.ModelingBrowseContext.Variable
      VP.VisualsContribution.HasRule SEL.VariablePropertyLabelRule
  @L0.assert VP.BrowseContext.HasVisualsContribution
    _ : VP.VisualsContribution
      VP.VisualsContribution.HasNodeType SEL.CategoryNode
      VP.VisualsContribution.HasRule SEL.CategoryNodeLabelRule
  @L0.assert VP.BrowseContext.HasVisualsContribution
    _ : VP.VisualsContribution
      VP.VisualsContribution.HasNodeType MOD.ModelingBrowseContext.Variable
      VP.VisualsContribution.HasRule SEL.StandardPropertySorterRule
  @L0.assert VP.BrowseContext.HasVisualsContribution
    _ : VP.VisualsContribution
      VP.VisualsContribution.HasNodeType MOD.ModelingBrowseContext.Variable
      VP.VisualsContribution.HasRule SEL.VariablePropertyModifierRule
  @L0.assert VP.BrowseContext.HasVisualsContribution
    _ : VP.VisualsContribution
      VP.VisualsContribution.HasNodeType MOD.ModelingBrowseContext.Variable
      VP.VisualsContribution.HasRule SEL.VariableDecorationRule
  @L0.assert VP.BrowseContext.HasVisualsContribution
    _ : VP.VisualsContribution
      VP.VisualsContribution.HasNodeType SEL.CategoryNode
      VP.VisualsContribution.HasRule SEL.CategoryDecorationRule

where input is obtained from modelled view runtime state 


    @SCLValue(type = "ReadGraph -> Resource -> Variable -> Variable")
    public static Variable singleVariableSelection(ReadGraph graph, Resource resource, Variable context) throws DatabaseException {
    	return ScenegraphLoaderUtils.getVariableSelection(graph, context);
    }

The rules of the standard browse context are as follows:

  • MOD.ModelingBrowseContext.VariablePropertyRule returns all properties (Variable.browseProperties) such that
    • All results contain all properties defined by VariablePropertyRule.RequireProperty
  • SEL.VariablePropertyCategoryRule returns a set of categories collected from all suitable properties (as above)
    • categories are identified by
      • var#HasStandardPropertyInfo#CategoryName
      • var#HasStandardPropertyInfo#CategorySortingName
    • hidden categories are not shown
      • see var#HasStandardPropertyInfo#IsHidden
  • SEL.VariablePropertyLabelRule collects a String->String map by searching properties var where
    • key is the value of (var#HasDisplayColumn)
    • value is the (Bindings.STRING) value of var
  • SEL.CategoryNodeLabelRule returns the map "HasDisplayProperty" -> ((CategoryNode)content).getName()
  • SEL.StandardPropertySorterRule sorts properties and categories by sorting name where sorting name is
    • (p#SortingName) or if absent (p#HasDisplayProperty) for a variable p
    • ((CategoryNode)content).getSortingName() for categories
  • SEL.VariablePropertyModifierRule returns org.simantics.browsing.ui.content.Labeler.Modifier by
    • finding the column property (by var#HasDisplayColumn)
    • trying to obtain a custom modifier (var#HasCustomModifier)
    • trying to obtain an enumeration modifier by listing (var#HasEnumerationValues) and returning org.simantics.browsing.ui.graph.impl.EnumerationVariableModifier3
    • returning org.simantics.browsing.ui.model.modifiers.VariableModifier2
  • SEL.VariableDecorationRule offsets the property name column of properties by one
  • SEL.CategoryDecorationRule displays categories as bold

The standard implementation can be customised by e.g.

  • Introducing more columns
  • Applying property filtering (RequiresProperty)
  • Adding decorations

Some other notable points

  • Modifier uses the property 'HasInputValidator' for getting a validator
  • Modifier writes with Bindings.STRING into the label property.
  • The labels may apply transformations such as unit conversion or formatting i.e. they can not be used for obtaining raw property data.

Future developments

Some generic Variable properties should be used in rules. These properties include

  • #
Retrieved from "https://dev.simantics.org/index.php?title=Selection_View&oldid=2718"